Konferanslar

Japonya’daki Konferanslar

Akkus, N., M. Kawahara, H. Nishimura, “Pressure Control of Superplastic Ti-Alloy Tube Deformation,” Proc. Of 87th Spring Conference of Japan Light Metal Institute, pp. 47-48, 1994.

Akkus, N., M. Kawahara, H. Nishimura, “Analytical Simulation of Superplastic Ti-Alloy Tube Deformation,” Proc. Of 88th Fall Conference of Japan Light Metal Institute, Vol. I, pp. 223-224(1995)

Yamaguchi, K., N. Akkus, M. Kawahara, “Analytical Simulation of Superplastic Dome forming of Ti-alloy Sheet,” Proc. the 74th Annual Meeting of JSME, Vol. 96-1, pp. 49-50, (1996) (in Japanese)

Nanko, Y., T. Takehana, N. Akkus and M. Kawahara, “Stress Analysis of FW Pressure Vessel with Plastic Liner,” Proc. the 1995 Annual Meeting of JSME/MMD, Vol.B, pp. 245-246, (1996) (in Japanese)

Hidaka, K., N. Akkus, M. Kawahara, T. Takehana (High Pres. Gas Safety Inst. of Japan), “An Analysis of Stress Redistribution in a Damaged FRP Wound Vessel,” Proc. of 22nd Symposium on Composite Materials, J. Soc. for Comp. Mat., (Nov. 1997) (in Japanese)

Rong, Z., N. Akkus and M. Kawahara, “Model Analysis of Pipe Spinning without Mandrel,” Proc. 48th Jpn. Joint Conf. Tech. Plasticity, pp. 461-462, (1997) (in Japanese)

Notou, H., N. Akkus, M. Kawahara, “Trial Design and Development of a Liner-less FRP Pressure Vessel,” Proc. the 75th Annual Meeting of JSME, Vol.II, pp. 333-334, (1998) (in Japanese)

Hidaka, K., N. Akkus, M. Kawahara, T. Takehana (High Pres. Gas Safety Inst. of Japan), “Effect of Stripped Damage on the Stress Distribution and Strength of FRP Pressure Vessel,” Proc. the 75th Annual Meeting of JSME, Vol. II, pp. 760-761 (1998) (in Japanese)

Kawahara, M., N. Akkus, T. Kamino, “Stress-Strain Analysis on a Model of “Artificial Bamboo”,” Proc. the 75th Annual Meeting of JSME, Vol. II, pp. 738-739 (1998) (in Japanese)

Suzuki, K., N. Akkus and M. Kawahara, “Thickness Control by Pre-deformation in Superplastic Free Bulge Forming,” Proc. the 75th Annual Meeting of JSME, Vol.I, pp. 239-240 (1998) (in Japanese)

Akkus, N., T. Takekusa, M. Kawahara, K. Ohtani, H Sendai, T. Hanyuda (Showa Highpolymer Co. Ltd), “CFRP with Light Curing Resin and Its Application to FW,” Proc. 43rd FRP CON-EX’98 in Shonan, pp.71-72, (Nov. 1998) (in Japanese)

Itagaki, M., N. Akkus and M. Kawahara, “Model Analysis of Mandrel-less Spinning of Al Pipes to Form Pressure Vessel Dome Part,” Proc. 49th Jpn. Joint Conf. Tech. Plasticity, Vol. 49, pp. 395-396 (Nov. 1998) (in Japanese)

Akkus, N., T. Usugi, K. Manabe, M. Kawahara, H. Nishimura, “Reverse Modeling of Superplastic Hemispherical Bulge Forming and its Application to Thickness Control,” Proc. of 96th Annual Meeting of Research Group on Superplasticity, Chiba, Japan, Vol. 96, 75-81 (1999).(in Japanese)

Akkus, N., M. Kawahara, K. Ohtani, H Sendai, T. Hanyuda (Showa Highpolymer Co. Ltd), “Application of the Light Curing Resin to the Manufacture of Composite Pressure Vessels,” Proc. of 44th CONEX’99 in Nagoya, Nagoya, Japan, pp. 97-98 (1999) (in Japanese)

El-Morsy, N. Akkus, K. Manabe, H. Nishimura, Superplastic Characteristics of Ti-alloy by Multi-dome forming, Proc. of 97th light metal society conference, pp. 95-96, (1999)

Akkus, N., G. Verchery, Y. Kanemoto, M. Kawahara, “Manufacturing and Testing of 2-D Light cured GFRP Composite Structures,” Proceed. Of the 25th Symposium for Composite Materials, Japan Society of Composite Materials, Sapporo, Japan, pp. 77-78 (2000) (in Japanese)

Akkus, N., S. Kobayashi, M. Kawahara, K. Ohtani, H. Sendai, “Temperature Distribution and Contradiction Strain of GFRP during Light Curing Process,” Proc. of 45th FRP CONEX 2000, Tokyo, pp. 155-156 (2000) (in Japanese)

El-Morsy, N. Akkus, K. Manabe, FE Simulation of Superplastic Rectangular Box Forming Using Material Characteristics by Multi-dome Forming Test, Proc. of 52nd Japanese Joint conference for technology of plasticity, pp. 51-52, (2001)

FE Simulation of Superplastic Rectangular Box Forming Using Material Characteristics by Multi-dome Forming Test, Proc. 56th Jpn. Joint Conf. Tech. Plasticity, Vol. 56, pp. 342-343 (March, 2002)

Akkuş, N. ve Ünal S., “Mesleki Teknik Eğitim için Mekatronik Bölümü Planlaması”, Laboratuvar Dünyası, Sayı 7, Ekim 2003, s 26-33

Gümüş M., Akkuş N., Binark A. K., “Otomotiv Mekatroniği Eğitimi”, Otomotiv Teknolojileri Kongresi, Bursa, Temmuz 2004

Akkuş, N., “Endüstri Meslek Liseleri, Teknisyen Okulları ve Teknik Öğretmen Okulları için Mekatronik Eğitimi Programları ve laboratuvar donanımları, 126 sayfa çeviri. (Özel çalışma, yayınlanmamıştır)

Akkuş, N. “Türkiye’nin İlk Mekatronik laboratuarları açıldı”, Automotiv dergisinde söyleşi, Sayı 23, Ocak 2004, S 72-74

Akkus, N., E. Toptas, G. Verchery, M. Kawahara “Design and FEM Simulation of Interlaced Fiber Composite Structures” Conference for Computer Aided Engineering and System Modeling, Istanbul-Turkey, FIGES conference series, November 14-15, 2005

Akkus N., Çapkın A., “Orthogonal kesme işleminde kesmeye etki eden faktörlerin sonlu elemanlar modeli ve deneysel yöntem ile mukayesesi”, MSC.Software 2006 yılı Kullanıcılar Konferansı, Haziran 2006, Istanbul.